FAQ

IPC Connectors

Explore how NPDesign IPC connectors work, what they are used for, and why they are a practical solution for utility-scale solar trunk bus systems. This section covers installation benefits, conductor ranges, and how insulation piercing technology helps simplify field wiring.

IPC Connectors

View All FAQs
Are NPDesign IPC connectors UL 9703 listed?

Yes. NPDesign’s IPC connector lineup is UL 9703 certified and listed, which is a major part of its product positioning for photovoltaic applications.

Why use an IPC trunk bus system in solar?

An IPC trunk bus system can reduce connection points, simplify array wiring, and lower field labor compared with more traditional DC wiring layouts. It reduces voltage drop and helps create a cleaner, more standardized installation process across large solar projects.

How is proper installation torque confirmed?

NPDesign IPC connectors use shear bolts that confirm proper torque during installation. This helps reduce guesswork in the field and supports a more consistent connection from one tap point to the next.

What cable sizes do NPDesign IPC connectors support?

The IPC product line covers trunk bus sizes from 1/0 AWG through 1000 KcMil, with tap cable support starting at #10, #8, #6 AWG depending on the model. This gives project teams options across a wide range of utility-scale solar layouts.

How fast do the IPC connectors install?

NPDesign IPC connectors are designed to install in under two minutes per tap. That faster install time helps crews move more efficiently across the array while keeping the process simple and repeatable.

Do NPDesign IPC connectors require wire stripping?

No. NPDesign IPC connectors are designed to make the connection without stripping the cable insulation first. This helps speed up installation, reduce extra cable prep in the field, and create a more consistent connection process across large solar projects.

What is an IPC connector?

An IPC connector is an insulation piercing connector designed to create a field-installed electrical tap connection without requiring wire stripping at the tap point. NPDesign presents IPC connectors as a faster and more efficient solution for solar trunk bus systems.

Our Products

IPC Solutions for
Every Project Scale

View All Products

IPC Connectors

Insulation piercing connectors with no wire stripping, shear-bolt torque control, and environmentally sealed teeth. Installs in under 2 minutes per tap.

Learn more

End Cap Assemblies

Protective covers for inline, commercially available splice connections that provide a quick, field-installed wiring splice with reliable performance in demanding environments.

Learn more

Splice Connector Covers

Protective covers for inline, commercially available splice connections that provide a quick, field-installed wiring splice with reliable performance in demanding environments.

Learn more

Common Questions

Frequently asked questions featured across the site.

View All FAQs
How does an IPC trunk bus system replace combiner boxes?

Instead of routing individual string cables to a central combiner box, IPCs connect strings directly to a trunk bus cable that runs along the array. This eliminates combiner box hardware, reduces underground conduit runs, lowers voltage drop, and cuts total connection points dramatically — resulting in less labor, less material, and fewer potential failure points.

Why UL 9703 instead of UL 486?

UL 9703 was developed specifically for wiring harnesses in distributed generation systems. It requires more aggressive testing — including freeze cycles, thermal chamber, wet high-pot, and impact tests — than UL 486, which covers a broader range of general-purpose connectors. It’s the highest standard available for solar EBOS connections.

What sizes do your IPCs support?

Our IPC product line covers trunk bus sizes from 1/0 AWG through 1000 KcMil, with tap cable support for #10, #8, #6 AWG. Available in single-tap and dual-tap configurations to match your array string count and inverter layout.

What is an insulation piercing connector?

An IPC connects string-level DC wiring to a trunk bus cable by piercing through the cable insulation with tin-plated teeth. This eliminates wire stripping in the field, reduces connection time, and creates a sealed, weather-resistant joint. The result is fewer failure points and faster array commissioning.

What does NPDesign do?

NPDesign engineers and delivers EBOS infrastructure for utility-scale solar projects, with a strong focus on Solar IPC trunk bus systems, connectors, engineering support, and project-specific kitting and logistics.

What is an IPC connector?

An IPC connector is an insulation piercing connector designed to create a field-installed electrical tap connection without requiring wire stripping at the tap point. NPDesign presents IPC connectors as a faster and more efficient solution for solar trunk bus systems.

Do NPDesign IPC connectors require wire stripping?

No. NPDesign IPC connectors are designed to make the connection without stripping the cable insulation first. This helps speed up installation, reduce extra cable prep in the field, and create a more consistent connection process across large solar projects.

How fast do the IPC connectors install?

NPDesign IPC connectors are designed to install in under two minutes per tap. That faster install time helps crews move more efficiently across the array while keeping the process simple and repeatable.

What cable sizes do NPDesign IPC connectors support?

The IPC product line covers trunk bus sizes from 1/0 AWG through 1000 KcMil, with tap cable support starting at #10, #8, #6 AWG depending on the model. This gives project teams options across a wide range of utility-scale solar layouts.

Why use an IPC trunk bus system in solar?

An IPC trunk bus system can reduce connection points, simplify array wiring, and lower field labor compared with more traditional DC wiring layouts. It reduces voltage drop and helps create a cleaner, more standardized installation process across large solar projects.

Does NPDesign provide engineering support or only products?

NPDesign provides both products and engineering support. That includes site plan review, single-line review, IPC sizing, array layout support, field guidance, and other services that help customers apply the right EBOS solution to the project.

Does NPDesign offer project-specific kitting?

Yes. NPDesign can kit connectors, trunk cable, harnesses, and accessories by site zone and construction schedule. This helps crews receive materials in a more organized way for the work being done on site.

Why is UL 9703 important?

UL 9703 is a photovoltaic connector standard that supports safety, inspection confidence, and project compliance. Using listed components can also help give developers, EPCs, and contractors more confidence in the connection system being installed.

How does it work to start a project with NPDesign?

The process starts with sharing the site plan and single-line diagram. From there, NPDesign reviews the EBOS requirements, develops the connector and trunk bus approach, and helps move the project toward kitting, delivery, installation, and energization.

How can I contact NPDesign?

Customers can reach out through the contact and quote request options on the site, and NPDesign also lists in**@*********lc.com as a direct contact email.

NPDesign — Industrial EBOS Solutions

Meeting Industrial Needs
Since 2010.

Ready to reduce installation time, lower field labor costs, and deploy with a connector system proven across 2+ GW? Let's talk.

Browse Products